JD-905/906
Free Fall Metal Detector
Powdered and granular materials in the food, plastics, chemical, and pharmaceutical industries may become contaminated with metal during conveying and processing. To suit different feeding conditions, the free-fall metal separator can be configured in three ways: basic free-fall, vacuum suction feeding, or vibratory feeding, giving in-line detection and automatic separation in each case.
- Detection Accuracy: Iron (Fe) ≥ 0.3 mm;
- Copper (Cu) ≥ 0.4 mm;
- Stainless Steel (SUS304) ≥ 0.6 mm
It suits bulk materials such as powders and granules, using gravity to carry material through the detection zone. No conveyor belt is required. The construction is compact, which makes it straightforward to connect into hoppers, silos, or vertical feed systems.
- Basic free-fall. Suited to production lines that already have an upstream feeding system.
- Free-fall + vacuum feeder. Suited to applications where material has to be transferred automatically from drums or silos.
- Free-fall + vibratory feeder. Suited to materials with fluctuating flow, or materials prone to falling in concentrated masses. The feeder makes the feed more even and reduces material falling all at once or building up.
The equipment uses electromagnetic induction detection technology. Material falls freely through the detection pipe, and as it passes the metal detection coil the equipment registers a change in the electromagnetic signal. The control system immediately activates the reject device and separates the material containing metal contaminants. Once rejection is complete, the mechanism returns to its normal state and acceptable material continues to the next production stage.
| Item | JD-905/906 Free Fall Metal Detector |
| Detection principle | Electromagnetic induction |
| Detectable metals | Iron (Fe), copper (Cu), stainless steel, etc. |
| Frame material | Painted SUS304 stainless steel |
| Reject time | 0.3–5 s, adjustable |
| Air consumption | 0.4 L per reject cycle |
| Detection sensitivity | Fe ≥0.3 mm; Cu ≥0.4 mm; SUS304 ≥0.6 mm |
| Compressed air supply | 0.3–0.5 MPa |
| Machine dimensions | L 300 × W 400 × H 440 mm |
| IP rating | IP65 standard |
| Power | Single-phase AC 200 V, 50 Hz / 100 W |
- Vacuum feeder
- Vibratory feeder
- Detection pipe diameter
- Inlet and outlet dimensions
- Reject valve design
- Reject time
- SUS304 / SUS316 construction
- IP66 / IP69K protection rating















