Checkweigher with Flipper Rejector
Some products cannot be rejected by air blast or pusher. For these, a flipper rejector separates out-of-tolerance products by changing the conveying direction. It suits regularly shaped products of relatively light weight.
- Weighing Accuracy: ±0.1 g to 1 g
- Weighing Range: ≤1,000 g
- Line height: 750 ± 50 mm
Once weighing is complete, the control system judges each product against the preset standard. When an out-of-tolerance product reaches the reject zone, the flipper mechanism acts quickly, changing the product's original conveying path and guiding it to a designated area.
Compared with simply stopping the line and sounding an alarm, the flipper design diverts products automatically while production continues. It separates out-of-tolerance products and reduces product damage at the same time.
As a product crosses the weighing zone, the sensor measures its weight in real time and the system compares the reading with the set value. When the product is judged non-conforming, the system actuates the left and right flipper to divert it off the main flow.
| Item | Checkweigher with Flipper Rejector |
| Weighing method | Inline checkweighing |
| Weighing range | ≤1,000 g |
| Construction | Stainless steel; SUS316 available on request |
| Line height | 750 ± 50 mm (custom height available) |
| Weighing platform | L 400 × W 220 mm (customizable) |
| Overall dimensions | L 1,600 × W 685 × H 1,335 mm |
| Weighing accuracy | ±0.1–1 g |
| Conveyor speed | 10–60 m/min, adjustable via VFD |
| Power | AC 220 V / 200 W |
- Weighing platform dimensions
- Conveyor belt width and length
- Conveyor height
- Conveyor speed
- Flipper length
- Flipper movement direction
- Single-side or dual-side diversion
- Reject collection device
- Product guide mechanism
- SUS304 / SUS316 construction
- Various conveyor belt materials














