Checkweigher With Dual Rejector

Checkweigher With Dual Rejector

A standard checkweigher rejects every out-of-tolerance product into the same place. Some production lines need more than that. They need underweight and overweight products distinguished and collected separately, ready for re-inspection, rework, or quality analysis.

  • Weighing Accuracy: ±0.1 g to 1 g
  • Weighing Range: ≤1,000 g
  • Line height: 750 ± 50 mm
Why Choose a Checkweigher with Dual Rejector?

This checkweigher uses two independent reject units and sorts products according to the weighing result. After weighing, the system judges each product against the preset weight range as underweight, acceptable, or overweight, then collects the two anomaly types separately.

How Does It Work?

Load cells measure each product's weight in real time. As the product crosses the weighing zone, the system captures the reading and compares it with the set standard. When a product is out of tolerance, the system compares the actual weight against the preset lower and upper target limits, and the corresponding reject unit separates it automatically. The result is in-line weighing with non-conforming products classified by type.

Specifications
ItemCheckweigher With Dual Rejector
Weighing methodInline checkweighing
Weighing range≤1,000 g
ConstructionStainless steel; SUS316 available on request
Line height750 ± 50 mm (custom height available)
Weighing platformL 400 × W 220 mm (customizable)
Overall dimensionsL 1,600 × W 685 × H 1,335 mm
Weighing accuracy±0.1–1 g
Conveyor speed10–60 m/min, adjustable via VFD
What Are the Optional Configurations?
  • Weighing range
  • Weighing platform dimensions
  • Conveyor belt width and length
  • Conveyor height
  • Conveyor speed
  • Type of first reject mechanism
  • Type of second reject mechanism
  • Distance between the two reject positions
  • Reject collection device
  • Underweight and overweight judgment ranges
  • Product guide mechanism
  • SUS304 / SUS316 construction
  • Different conveyor belt materials