JD-603
Tunnel Metal Detector
There are three methods by which metal is introduced into food, pharmaceutical, and chemical products: it is introduced through manual handling, it is worn off the processing equipment, or it is introduced with the raw material. The JD-603 tunnel metal detector is capable of detecting iron, copper, and stainless steel contaminants in-line and removing the affected product prior to its departure from your facility. This process minimizes your exposure to customer complaints and recalls.
- Detection Accuracy: Iron (Fe) ≥ 0.8 mm;
- Copper (Cu) ≥ 1.0 mm;
- Stainless Steel (SUS304) ≥ 1.5 mm
- Built for automated lines. Product is conveyed continuously through the tunnel and inspected without breaking the flow.
- Less manual inspection. Every item passes through the metal detection aperture for in-line inspection, which takes pressure off QC staff.
- Straightforward integration. The detector connects to existing lines and automatic reject systems. Wherever your product travels horizontally, this is the format that fits.
- Product enters the aperture, where the detection coils generate a balanced electromagnetic field.
- A metal contaminant disturbs that field.
- The system analyzes the change in signal, identifies the metal, and triggers an audible and visual alarm plus the automatic rejector.
| Item | JD-603 Tunnel Metal Detector |
| Detection principle | Electromagnetic induction |
| Detectable metals | Iron (Fe), copper (Cu), stainless steel, etc. |
| Construction | SUS304 stainless steel |
| Line height | 700 mm (custom heights available) |
| Aperture size | W 400 × H 100 mm (customizable) |
| Detection sensitivity | Fe ≥0.8 mm; Cu ≥1.0 mm; SUS304 ≥1.5 mm |
| Performance | Actual performance is confirmed by sample testing and depends on product height, packaging material (e.g. plastic bags or cartons), product temperature and humidity, and conveyor speed. |
| Conveyor speed | Fixed 20 m/min; adjustable 15–30 m/min |
| IP rating | IP65 standard |
| Power | Single-phase 220 VAC or 110 VAC, 200 W |
-
Pusher RejectorHeavier, stably packed products: vacuum-packed meat, frozen foods, bread, pharmaceutical packs. A pneumatic cylinder pushes the rejected product off the main conveyor.
-
Air-Blast RejectorLight products on fast lines: tea, seasonings, small food pouches.
A high-speed air jet blows the rejected product clear of the conveyor. -
Flap RejectorMedium-weight products whose packaging must stay intact: chocolate boxes, cartoned foods, frozen packs. A flap changes the product's conveying direction, diverting it smoothly without collisions.
-
Flipper RejectorSmall to medium packs: biscuits, tea, pharmaceutical packs. A flipper sweeps the rejected product off the main conveyor.
-
Mid-Section Lift RejectorVacuum-packed and high-value foods where appearance and packaging matter. The middle conveyor section raises or lowers so the product leaves the line gently, minimizing impact and pack damage.
-
End-of-Line Lift RejectorHeavy products that need their packaging protected: steaks, large food bags, gift boxes. The end conveyor section raises or lowers to change the product's direction.
-
Conveyor Stop AlarmFlour sacks, rice bags and other large-format products. The conveyor stops and an alarm sounds so an operator can remove the product by hand.
Most providers list fewer than seven possibilities. The practical benefit is that the reject method may be tailored to the pack rather than the pack being pushed onto whatever rejector is available, which is especially important for vacuum packs, gift boxes, and other products where a rough rejection harms salable goods.
- Aperture size
- Belt width and length
- Reject collection bin
- Belt material
- Adjustable conveyor speed
- IP65 / IP66 / IP69K protection
- Automatic rejector
- SUS304 / SUS316 stainless steel construction
- Audible and visual alarm
- Photoelectric sensors for product tracking or reject timing, where required















